TM                     

[ Home ] [ Up ] [ Products ] [ About Us ] [ Disclaimer ] [ Terms and Conditions ]

 

European based company with global Delivery 

www.robotmaker.co.uk

 

________________

 

 

Home

 

 

 

________________

 

 

    IRCF user group

________________

 

If you need support with our products then click here to register  > Support Centre

 

________________

 

 

http://www.bittybot.com

http:/www.solarbotics.com

 

_________________________

 

 

 

 

 

________________

 

 

News Feeds

Latest Robot - News

Latest Robot - Blogs

Latest Robot - Videos

Latest Robot - Groups

Latest Robot - Web

 

You Tube

Morphogenesis: Shaping Swarms of Intelligent Robots

 

 

more News...

______________________

 

What is Biomimetics? It is the abstraction of good design from Nature.

 

 

 

2-Way Object Sensor (Kit)

  1. Forward-looking two-sensor object-detector 
  2. 1.55" x 0.35" x 0.10" thick 
  3. Short-range sensing of up to 4-6" 
  4. "Objected detected" red and green indicator LEDs eases debugging and adds to your robot's aesthetics. 
  5. High/low digital output for each sensor makes it easy to interface with most microcontrollers Digital output goes "low" when an object is in range 
  6. Based on Sharp's popular IS471F sensor -- this sensor modulates the emitter IR LEDs and filters out return signals outside the modulation frequency for increased immunity to false triggering 
  7. 5V operation

3-Way Object Sensor (Kit)

  1. Forward-looking three-sensor object-detector 
  2. 1.90" x 0.50" x 0.35" thick Short-range sensing of up to 4-6" 
  3. "Objected detected" red, yellow and green indicator LEDs eases debugging and adds to your robot's asthetics. 
  4. High/low digital output for each sensor makes it easy to interface with most microcontrollers 
  5. Digital output goes "low" when an object is in range 
  6. Based on Sharp's popular IS471F sensor -- this sensor modulates the emitter IR LEDs and filters out return signals outside the modulation frequency for increased immunity to false triggering 
  7. 5V operation

Assembly instructions:

2-Way/3-Way Object Sensor Assembly Instructions

These kits comes complete with well labeled parts. As you can see below, the kit requires assembly of some small surface-mount components. Advanced soldering skills and a good soldering equipment required.

 

 

 

 

 Copyright ROBOTmaker © 2003. All rights reserved.
For problems or questions regarding this website please  contact [support at ROBOTmaker.co.uk].
Last updated: May 04, 2008.