TM
|
|
European based company with global Delivery
________________
________________
________________
If you need support with our products then click here to register > Support Centre
________________
_________________________
________________
News Feeds
You Tube Morphogenesis: Shaping Swarms of Intelligent Robots
______________________
What is Biomimetics? It is the abstraction of good design from Nature.
|
Infrared Control Freak Calibrating the LEDs and Sensors Place the IRCF(-L) about 5cm above a flat surface; preferable on a surface that has been covered with back cloth or card. For best results, adjust the Left and Right Infrared Receivers 5°-10° degrees towards the front. The sensors should also be facing slightly towards the ground by 1-2 degrees. The amount of adjustment depends on how high or low the IRCF module will be mounted. |
|
Copyright ROBOTmaker ©
2003. All
rights reserved.
|
